This is the third part in a series of posts about fabrication work that we do for the bridge industry including long forming and welding. In Part 1 we showed a photo of the formed bridge girder and in Part 2 we showed the same girder after it had studs welded onto it. The photo below shows the girder during the galvanization process which is performed to inhibit rust on the component.
![Galvanization of a formed and welded Bridge Girder](https://blog.atfco.com/hs-fs/hubfs/Imported_Blog_Media/Galvanization-1024x576-11.jpg?width=800&height=450&name=Galvanization-1024x576-11.jpg)